Zibo Chemical Machinery Co., Ltd. Guangzhou to introduce you to the autoclave routine maintenance Note the following areas: 1, to inspect the reactor body before the operation there is no crack, bulge, deformation, corrosion, perforation and other phenomena, Jinzhou reaction tank insulation and paint is intact, without loss, charred situation. Safety valves and pressure gauges are intact. 2, the reaction should always listen to the kettle body without abnormal vibration and noise. 3, the flange and the base and other parts of the reactor vessel inspection body loose bolts. 4, listen to whether the motor running sound normal temperature under normal circumstances drove temperature not higher than 40 ℃. Zibo Chemical Machinery Co., Ltd. to provide you a wide interpretation of the reactor hydrothermal synthesis method: 1, the reaction was poured into Teflon liner or PPL bushings, mechanical reaction tank, and to ensure feeding coefficient is less than 0.8. 2. Make sure the gasket in the correct position under the kettle (projections facing down), and then placed in Teflon liner and the liner or spacer PPL, first tighten the tank cover, then screw the lid was tightened up knob . 3, the hydrothermal synthesis reactor is placed inside of the heater in accordance with a predetermined heating rate was raised to the desired reaction temperature. (Less than a predetermined safe temperature). 4, when the temperature is below Confirm abdominal solvents reaction system can only open the tank lid boiling point for subsequent action. Completion of the reaction will be when its cool, but also in strict accordance with the provisions of the cooling rate operation, the reaction tank specifications, to facilitate the safety and reactor life. 5, after the confirmation of intra-abdominal temperature below the boiling point solvents reaction system, first screw the kettle lid knob is released and the kettle lid open. 6, hydrothermal synthesis reactor should be promptly after each use to clean, to avoid corrosion. Kettle body, kettle lid seal line to pay particular attention to clean and prevent damage to their bruised. The reaction tank manufacturers | Jinzhou reaction tank | Shandong wide by Zibo Chemical Machinery Chemical Machinery Co. wide. Zibo Chemical Machinery Co., Ltd. Guang (www.zbdghgsb.com) strong, credible, Shandong Zibo Chemical Equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the big wide chemical machinery and you hand in hand into the brilliant, for a better future!